MULTI-REFRIGERANT RECOVERY SYSTEM

FEATURES:

• Automatic Low Pressure Cut Off Switch
• Small and lightweight
• Fully Reinforced Hard Plastic Casing
• High Performance Oil-Less Compressor
• High Volume Cooling Fan Design
• Liquid Compatible Head Valve System
• Safety High Pressure Cut-Off Switch
• Works With All Refrigerants

SPECIFICATIONS

• Recovery Rate
  • Direct Vapor Up To .5 Kg/M (3/4 Lb/M)
  • Direct Liquid Up To 1.4 Kg/M (2 1/2 Lb/M)
  • Push-Pull Up To 5.5 Kg/M (12 Lb/M)
• 115V-60Hz
• Operating Temp. Range: 0 To 50°C (32 To 122°F)
• 1/2 HP Oilless compressor
• Dimensions: 17"L x 10"W x 12"H (432mm L x 254mm W x 305mm H)
• Weight: 16Kg (38 Lbs)
• Refrigerants: CFC's, HCFC's, And HFC's

MULTI-REFRIGERANT RECOVERY SYSTEM

FEATURES:

• Automatic Low Pressure Cut Off Switch
• Small and lightweight
• Fully Reinforced Hard Plastic Casing
• High Performance Oil-Less Compressor
• High Volume Cooling Fan Design
• Liquid Compatible Head Valve System
• Safety High Pressure Cut-Off Switch
• Works With All Refrigerants

SPECIFICATIONS

• Recovery Rate
  • Direct Vapor Up To .5 Kg/M (3/4 Lb/M)
  • Direct Liquid Up To 1.4 Kg/M (2 1/2 Lb/M)
  • Push-Pull Up To 5.5 Kg/M (12 Lb/M)
• 220V-50/60Hz
• Operating Temp. Range: 0 To 50°C (32 To 122°F)
• 1/2 HP Oilless compressor
• Dimensions: 17"L x 10"W x 12"H (432mm L x 254mm W x 305mm H)
• Weight: 16Kg (38 Lbs)
• Refrigerants: CFC's, HCFC's, And HFC's

SKYE BLUE SINGLE-REFRIGERANT A/C SERVICE CENTER
R-134A REFRIGERANT

FEATURES:

• Simple controls with function indicator lights that follow the job sequence.
• Vacuum pump timer - 5 to 60 minutes.
• 25 micron, 5 CFM high performance vacuum pump.
• Automatic NCG detection and purge.
• Compressor oil service port.
• Analog hour meter to determine filter change intervals.
• Easy "Spin On" filter.
• Programmable charging scale with .5 oz. resolution and heavy duty load cell.
• Vapor/Liquid recovery with single pass recycling.
• Oil charge on vacuum side.
• Tank full indicator light.
• Includes one 30 lb dual valve storage tank and appropriate gauge set.

SPECIFICATIONS:

• Complies with SAE J1991(8512) and SAE J2210(8534).
• 115VAC 50/60Hz
• 1/2 HP Hermetic compressor.
• Dimensions - 45"H x 20.5"W x 23"D
• Shipping weight - 180 lbs.

SKYE BLUE SINGLE-REFRIGERANT A/C SERVICE CENTER
R-12 REFRIGERANT

FEATURES:

• Simple controls with function indicator lights that follow the job sequence.
• Vacuum pump timer - 5 to 60 minutes.
• 25 micron, 5 CFM high performance vacuum pump.
• Automatic NCG detection and purge.
• Compressor oil service port.
• Analog hour meter to determine filter change intervals.
• Easy "Spin On" filter.
• Programmable charging scale with .5 oz. resolution and heavy duty load cell.
• Vapor/Liquid recovery with single pass recycling.
• Oil charge on vacuum side.
• Tank full indicator light.
• Includes one 30 lb dual valve storage tank and appropriate gauge set.

SPECIFICATIONS:

• Complies with SAE J1991(8512) and SAE J2210(8534).
• 115VAC 50/60Hz
• 1/2 HP Hermetic compressor.
• Dimensions - 45"H x 20.5"W x 23"D
• Shipping weight - 180 lbs.

RECOVERY SYSTEM
R-12 REFRIGERANT

FEATURES:

• Portable recovery for off site or in shop use.
• Simple ON/OFF controls with function indicator lights.
• Trolley kit with removable handle for easy transport.
• Vapor/Liquid recovery in one step.
• Compressor oil service port.
• Analog hour meter to determine filter change and oil change intervals.
• 30 hour filter life.
• Tank full indicator light.
• Includes 50 lb dual valve storage tank.

SPECIFICATIONS:

• UL Listed for SAE J2209(EP10A).
• 115VAC 50/60Hz.
• 1/2 HP Hermetic Compressor.
• Dimensions(without trolley) - 16"H x 14"W x 10"D.
• Shipping weight - 80 lbs.

RECOVERY SYSTEM
R-12, 22, 500, 502, & 134a REFRIGERANT

FEATURES:

• Portable recovery for off site or in shop use.
• Simple ON/OFF controls with function indicator lights.
• Trolley kit with removable handle for easy transport.
• Vapor/Liquid recovery in one step.
• Compressor oil service port.
• Analog hour meter to determine filter change and oil change intervals.
• 30 hour filter life.
• Tank full indicator light.
• Includes 50 lb dual valve storage tank.

SPECIFICATIONS:

• UL Listed for ARI 740-91 and 740-93(EP10M).
• 115VAC 50/60Hz.
• 1/2 HP Hermetic Compressor.
• Dimensions(without trolley) - 16"H x 14"W x 10"D.
• Shipping weight - 80 lbs.

RECOVERY SYSTEM
R-134a REFRIGERANT

FEATURES:

• Portable recovery for off site or in shop use.
• Simple ON/OFF controls with function indicator lights.
• Trolley kit with removable handle for easy transport.
• Vapor/Liquid recovery in one step.
• Compressor oil service port.
• Analog hour meter to determine filter change and oil change intervals.
• 30 hour filter life.
• Tank full indicator light.
• Includes 50 lb dual valve storage tank.

SPECIFICATIONS:

• UL Listed for SAE J1732(EP10N).
• 115VAC 50/60Hz.
• 1/2 HP Hermetic Compressor.
• Dimensions(without trolley) - 16"H x 14"W x 10"D.
• Shipping weight - 80 lbs.

RECOVERY SYSTEM
ANY REFRIGERANT

FEATURES:

• You won't have to turn away A/C jobs because the refrigerant is contaminated.
• Recovery-only unit designed for quickly capturing contaminated or unknown refrigerants, mixtures, and blends.
• Protects your recovery/recycling equipment and your shop's refrigerant supply.
• Recover into one 50 lb. tank for collection and off-site disposal (mixtures and blends cannot be recycled).
• Simple to hook-up and operate with instructions printed on the control panel for quick reference.
• Air regulator for compressor air supply.
• Air line lubricator which prolongs motor life by supplying continuous lubrication.
• Includes two hoses (one with 1/4"MFL fitting and one with 1/2" Acme service coupler).

RECOVER, RECYCLE, EVACUATE, AND RECHARGE
R-134a REFRIGERANT

FEATURES:

• Automatic recovery/recharge by weight
• Programmable vacuum time intervals
• Manual air purge - gauges on control panel show when to purge air
• Oil drain - display reminds you to drain the system oil captured during recovery. Graduations on container show clearly how much oil needs to be replaced.
• Oil inject - system prompts user to inject oil before charge. O-ring on oil reservoir provides visual reference on graduated container.
• Electronic scale - mounted internally. It has a dampening mechanism that protects against impact shocks. Weighs recovered refrigerant and charges by weight for greatest accuracy
• Internal storage vessel - refrigerant is recovered into and charged out of this vessel. Permanently mounted to scale for reliability.
• Internal manifold - block manifold contains solenoids that control refrigerant flow. Reduces possibility of leaking connections.
• Maintenance prompts - system prompts user to change vacuum pump oil and filter-drier when needed.
• Ergonomic design - cabinet is easy to maneuver between service bays and position near vehicle.
• Gauges - high and low side gauges are mounted at an angle that's easy to see.
• Unit of measure - select pounds or kilograms through the menu.
• Heavy-duty compressor pulls from both sides during recovery.
• Refrigerant recycling meets or exceeds SAE J-2210.
• Oil injector lets you add system oil in seconds.

SPECIFICATIONS:

• Voltage - 115V/60Hz
• Refrigerant container - Onboard 30 lb vessel (source tank not included)
• Operating range - 50° to 120°F
• Recycling filter/drier - 43 cu. in. in-line
• Pump free air displacement - 3 cfm
• Dimensions - 50"H x 34"W x 23"D
• Shipping weight - 225 lbs.

RECOVER, RECYCLE, EVACUATE, AND RECHARGE
R-134a REFRIGERANT

FEATURES:

• Automatic function lets you program the unit to recover, vacuum, leak test, charge, and then walk away.
• Vacuum leak test - will monitor the vacuum level after an evacuation and inform the technician of a possible leak.
• Automatic refrigerant refill - never have to stop in the middle of a job to change refrigerant tanks. Signals when its time to change the supply tank.
• Automatic air purge - eliminates damaging air without any monitoring of gauges or opening of valves.
• Automatic oil drain - automatically drains system oil captured during recovery. Display reminds you to empty bottle. Graduated container clearly shows how much oil needs to be replaced.
• Easy Refrigerant charging - Select a charge mode from either the high side, low side, or both.
• Electronic scale - mounted internally. Has a dampening mechanism that protects against impact shocks. Weighs recovered refrigerant and charges by weight for accuracy.
• Internal storage vessel - Refrigerant is recovered into and charged out of this vessel. Mounted permanently to scale for reliability.
• Internal manifold - block manifold contains all the solenoids that control refrigerant flow in and out of the unit, reducing possibility of leaking connections.
• Ergonomic design - cabinet is easy to maneuver between service bays and position near vehicle.
• Gauges - 4" high and low side gauges are mounted at an angle that's easy to see.
• Compressor pulls from both high and low sides during recovery.
• Single pass recycling meets SAE specs.
• Oil injector lets you add system oil in seconds.

SPECIFICATIONS:

• Voltage - 115V/60Hz
• Refrigerant container - Onboard 30 lb vessel (source tank not included)
• Operating range - 50° to 120°F
• Recycling filter/drier - 43 cu. in. in-line
• Pump free air displacement - 6 cfm
• Dimensions - 50"H x 34"W x 23"D
• Shipping weight - 235 lbs.

RECOVER, RECYCLE, EVACUATE, AND RECHARGE
R-12 REFRIGERANT

FEATURES:

• Fast and accurate.
• One hookup - all service work is done in one fast, continuous operation through the standard high and low side hook-ups to the vehicle, there's no switching hoses or changing tanks.
• Heavy Duty Compressor - Pulls from both low and high sides to recover all refrigerant from the vehicle as quickly as possible.
• 6 CFM Vacuum Pump - has the power to quickly evacuate the system prior to recharging.
• Electronic scale - permanently mounted inside the cabinet with protection against shock impact. Charges by weight and measures recovered refrigerant.
• No Special Training Needed! - prompts on the alpha-numeric display lead you through programming, tells you what function is currently in process, and reminds you to change the filter-drier, vacuum pump oil, etc.
• Automatic Refrigerant Refill - refrigerant is recovered into and charged out of an internal storage vessel. Unit maintains a constant 12 to 15 lbs of refrigerant in this vessel, filling it automatically from a disposable source tank as needed.
• Automatic Oil Drain - drains system oil that was removed during recovery without any attention from the user. A display signal reminds you to empty the bottle, while an on-board oil injector lets you replace the lost oil at the push of a button.
• Protects vehicles - rounded corners on the cabinet won't scratch or dent vehicles like metal cabinets will.
• Moves arount easily - handle is located at the optimum height to make moving the unit as effortless as possible. Control panel is located on the side so you can see where best to position the unit.
• Visible gauges - 4" manifold gauges so that you can easy view readings from under the hood.

RECOVER, RECYCLE, EVACUATE, AND RECHARGE
R-12, R-134a, R-22, AND R-502MP/HP AND OTHER REFRIGERANTS

FEATURES:

• Ideal for refrigerated trailers, buses, RV's with multiple refrigerants
• Lockout panel prevents mixing of refrigerants
• Comes with two 50 lb tanks.

RECOVERY AND RECYCLING SYSTEM
R-12, R-134a REFRIGERANTS

FEATURES:

• Automatic operation
• Two built-in manifolds, tanks, compressors, and scales so there's no need to clear or switch tanks
• Readouts in English, French, German, and Spanish
• Design certified by UL to meet SAE J-2210 and J-1990

FEATURES:

• Automatic operation - refill, air purge, oil drain
• Built-in diagnostics and easy to read display prompts you through the procedure
• Ergonomic design for easy maneuvering
• Large, easy to see gauges
• Design certified by UL to meet SAE J-2210

RECOVERY AND RECYCLING SYSTEM
R-134a REFRIGERANT

FEATURES:

• Economic design for in-shop mobility and portability for jobs on the go.
• Simple on/off controls with function indicator lights.
• Removable recovery/recycling module for portable service needs.
• Vapor/liquid recovery/recycling in one step.
• Compressor oil service port.
• Analog hour meter to determine filter change intervals.
• Easy "spin on" filter, 30 hour filter life.
• Automatic NCG purge.
• Tank full indicator light.
• Includes 30 lb dual valve storage tank and removeable gauge set.

SPECIFICATIONS:

• Complies with SAE J1991(8512) and SAE J2210(8534).
• 115 VAC 50/60Hz
• 1/2 HP Hermetic Compressor
• Dimensions - 45"H x 20.5"W x 23"D
• Shipping weight - 130 lbs.

RECOVERY AND RECYCLING SYSTEM
R-12 REFRIGERANT

FEATURES:

• Economic design for in-shop mobility and portability for jobs on the go.
• Simple on/off controls with function indicator lights.
• Removable recovery/recycling module for portable service needs.
• Vapor/liquid recovery/recycling in one step.
• Compressor oil service port.
• Analog hour meter to determine filter change intervals.
• Easy "spin on" filter, 30 hour filter life.
• Automatic NCG purge.
• Tank full indicator light.
• Includes 30 lb dual valve storage tank and removeable gauge set.

SPECIFICATIONS:

• Complies with SAE J1991(8512) and SAE J2210(8534).
• 115 VAC 50/60Hz
• 1/2 HP Hermetic Compressor
• Dimensions - 45"H x 20.5"W x 23"D
• Shipping weight - 130 lbs.

RECOVERYMATE

FEATURES:

• Large Capacity Oil Separator
• 4-Way Ball Valve Manifold Which Controls The Flow Smoothly And Quickly With Only A 1/4 Turn.
• High Performance Dryer Which Eliminates Moisture From Recovered Refrigerant.
• Extra Large Sight Glass Monitors Refrigerant Flow And Changes Color When A Dryer Change Is Needed.
• Lightweight And Easy To Carry.
• Rugged Carrying Case That Can Stand On Its Own Or Be Mounted On A Wall Or Bench.
• Length: 15", Height: 17", Width: 4", Weight: 12.25 Lbs.

RECYCLE GUARD
SEALANT, DYE, AND LUBRICANT SEPARATOR

FEATURES:

• CONNECT BETWEEN VEHICLE AND A/C SERVICE EQUIPMENT
  • Prevents damage to your service equipment
  • Keeps refrigerant supply clean
• HI-TECH FILTRATION
  • Allows flow even after trapping a lot of contaminant
  • Easily replace filters
  • Protects recovery oil separators
  • Traps oil sludge
• WORKS ON ALL R-134A A/C EQUIPMENT
  • Maintains closed loop refrigerant flush capability
• EASY CLEANOUT CONTAMINANT DRAIN